Rapidly dries out, easily polished, and does not break the nature of the surface. Ensures saturation of wooden floors saves time and materials, prevent the last layer of varnish from absorbing.
Filling the pallets of any kind of wooden material, such as massive and coating, used reliably to obtain a smooth surface for layers to be applied.
The surfaces to be applied should be completely cleaned of moisture, dirt, dust and grease. If necessary, the surface should be polished with sanding paper 220. Sobsan Cellulosic Filler varnish depending on application requirements dilute 30-50 % with a Sobsan Cellulosic Thinner and applied to two - three layers with a paint pistol or brush. Between the layers, must wait at least 30 minutes, a maximum 4 hours. Recommended wait at least 6 hours for applying the last coat.
1 kg. Cellulosic Filler Varnish can be coated in one layer on a surface of 7-10 m².
It can be stored non-falling direct sunlight in unopened original containers for up to 3 years at 5-35 °C. It should be protected from excessive heat and moisture.
S2 : Keep out of the reach of children.
S3/7/9 : Keep container tightly closed in a cool, well-ventilated place.
S16 : Keep away from sources of ignition - No smoking!
S24/25 : Avoid contact with skin and eye.
S29 : Do not empty into drains.
S46 : If swallowed, seek medical advice immediately and show this container or label.