About the product : Ceramic adhesive gray cement based on modified with chemical additives, easily applied and one    component. The product conforms to the standard AZS 039-2000.

Properties : 

Easy to prepare and apply.

It is applied on internal and external  places.

Long-term in use.

Resistant to the heat, freeze and moisture.

The curing of the mixture for a long time is especially comfortable during application.

Application area : Used for laying on the inner and outer horizontal and vertical surfaces of the premises finished with cement, when laying tile, ceramic tiles  and bricks. When laying ceramic tiles with sizes up to 60 cm x 60 cm, you can achieve high result.

Application : Used surfaces must be firm and clean before application. Clear surfaces all types of grease and the residues of paraffin. One day before application, fill the gaps and cracks with the Sobsan Ekstra product. Surfaces before application must be wet or primed with SobBinder. 25 kg of the powder dry mix to empty 6.0-6.5 liters of water. After 3-5 minutes, stir at low spin with a mixer until the bubbles disappear. After the dissolving of the bubbles, leave for 3-5 minutes,  when re-using first stir again a little then apply.

Consumption :

Storage : Store in unopened bags and in dry conditions, on wooden pallets, putting at each other 10 bags up to 12 months.

Safety:

S 2            : Keep out of the reach of children.

S 28           : After contact with skin, wash immediately with plenty of water.

S 36/37/39 : Wear suitable protective clothing, gloves and eye/face protection.

Note : The manufacturer company is not responsible for any defects or results if the instructions for use and storage of products are not followed !