About the product : Gray cement-based ceramic adhesives, rich in chemical additives, easy to prepare and apply, polymerized, one-component.The product conforms to the standard AZS 039-2000.

Properties :

Easy to prepare and apply.

It is applied on internal and external  places.

Long-term in use.

It is possible to glue from top to down ceramic and other facing tile.

Resistant to the heat, freeze and moisture.

Without removal old ceramics it is possible to glue new materials for facing.

Application area : It is used for laying on the internal and external horizontal and vertical surfaces, in the places trimmed with cement, when laying tiles, bricks, ceramic and glass mosaics.

Application : Mix is applied on surfaces with the flat side of the trowel. Then, with the toothed side of the tile trowel, it is laid at least 3 mm with distances. For laying large-sized plates used a combined laying. On a surface and also a reverse side of a tile it is necessary to smear mix. To condense with the rubber hammer so that the tiles adhere well. Adhesion of the mixture to the tile is determined by touching the finger on the surface. If the mixture sticks to the finger, the tiles can be laid. The time should not exceed 20 minutes. When applied, if the mixture hardens , this part must be removed from the surface and replaced with a new one.

Consumption : 

Storage : Store in unopened bags and in dry conditions, on wooden pallets, putting at each other 10 bags up to 12 months.

Safety : 

S 2            : Keep out of the reach of children.

S 28           : After contact with skin, wash immediately with plenty of water.

S 36/37/39 : Wear suitable protective clothing, gloves and eye/face protection.

Note : The manufacturer company is not responsible for any defects or results if the instructions for use and storage of products are not followed !