High quality acrylic copolymer based filling putty for exterior surfaces. 

Perfectly covers painted area. Durable to destructive impact of sunlight, moisture, rain and salty sea water. Allows walls to “breath” throws out the moisture. Easy to apply, fast drying. Considerably saves paint consumption. Creates reliable bases for subsequent layers of paint. 

Can be applied to all kinds of exterior surfaces in order to get smooth surface.

Before using Sobexpas, remove grease, dust, dirt, and remnants of old paint and anything that may prevent sticking from the surface. For fresh plastered surfaces, wait 21 days (at 20 ° C) until the plaster is completely hardened. After that you should use Sobexpas. Before applying filling putty, apply Sobbinder primer. For applying Sobexpas use a spatula and a compressor. If it is necessary to dilute 1.5-2% with water. The temperature of the painted surface should be above + 5º С, and the humidity is less than 80%.

1 kg. Sobexpas filling putty when applied with a spatula depending on the surface of  3.5 -5 m², and with a compressor can putty 1 m ² area.

Stored non-falling direct sunlight in closed original containers for up to 3 years at 5-35 °C. It should be protected from excessive heat and moisture.    

S2              : Keep out of the reach of children. 

S 3 / 7        : Keep container tightly closed in a cool place. 

S 24 / 25    : Avoid contact with skin and eye.

S 29           : Do not empty into drains.

S 46           : If swallowed, seek medical advice immediately and show this container or label. 

The manufacturer company is not responsible for any defects or results if the instructions for use and storage of products are not followed !