High-quality glossy varnish with single component composition of urethane alkyd connective based.
Easy to use. Dries quickly. Does not turn yellow and isn’t deformed. Impact resistance and high filling. Elastic will not crack. Resistant to the damaging effects of external factors, such as sea, sun, rain and sea water.
It is used to cover on board the wooden surface of ships, internal and external wooden paneling inside and outside of buildings and also used in furniture.
Surfaces that will be applied varnish must be dry and completely cleaned of dirt and grease. New wooden surfaces after rubbing the splinter should be saturated with Sobsan Cellulosic Filler Varnish and then applied with Sobmarin. Ready to use do not need to be diluted when applied with a brush or roller. When applied with a sprayer, it can be diluted with a synthetic thinner Sobsan Sintetik Tinner 10-20%. Sobmarin Yacht Varnish is applied on two layers and one day should be waited between layers.
1 kg. Sobmarin Yacht Varnish can coated in one layer on a surface of 16-19 m².
It can be stored non-falling direct sunlight in unopened original containers for up to 3 years at 5-35 °C. It should be protected from excessive heat and moisture.
S2 : Keep out of the reach of children.
S3/7/9 : Keep container tightly closed in a cool, well-ventilated place.
S16 : Keep away from sources of ignition - No smoking!
S24/25 : Avoid contact with skin and eye.
S29 : Do not empty into drains.
S46 : If swallowed, seek medical advice immediately and show this container or label.
S51 : Use only in well-ventilated areas.
The manufacturer company is not responsible for any defects or results if the instructions for use and storage of products are not followed !