Cement-based gray adhesive for aerated concrete or foam concrete, rich in chemical additives, one-component, easy to prepare and apply. The product conforms to the standard AZS 039-2000.

• Easy to prepare and apply.
• Long-term in use
• Accelerates laying.
• Resistant to the heat, freeze and moisture.
• Rich in polymers that give a high results.

Used for laying or adhesing decorative facing bricks and similar materials with high water absorption of aerated concrete or foam concrete.

The adhesive is applied with the same thickness both on the surface of the masonry wall and on the sides of the materials used in the laying, and the mosonry is done. Ready mix can be used within 3 hours. If the surface that is applied the mix formed a film then it is necessary rake out and applied again to the surface.

Store in unopened bags and in dry conditions, on wooden pallets, putting at each other 10 bags up to 12 months.

S 2            : Keep out of the reach of children.

S 28           : After contact with skin, wash immediately with plenty of water.

S 36/37/39 : Wear suitable protective clothing, gloves and eye/face protection.

The manufacturer company is not responsible for any defects or results if the instructions for use and storage of products are not followed !