Nitrocellulose and alkyd resin based, quick-drying primer for metallic surfaces.
It has good adhesion on the surface, high filling and surface coating. Quick-drying primer can be easily polished. Cellulosic finish creates an ideal base for the last coat of paint.
It can be used easily on all of surfaces, for metallic and polyester surfaces.
Surfaces for application must be clean, dry, and free from rust and dust. To eliminate the differences on the surface, old paints must be dug out and the surfaces must be perfectly filled and polished. Sobsan Cellulosic Metallic Primer depending on application requirements 30-40% mixed with Cellulosic Thinner and applied in double layer with paint pistol. Between the applied layers should wait at least 1-2 hours.
1 kg. Sobsan Cellulosic Metallic Primer can be coated in one layer on a surface of 6-8 m².
It can be stored non-falling direct sunlight in unopened original containers for up to 3 years at 5-35 °C. It should be protected from excessive heat and moisture.
S 2 : Keep out of the reach of children.
S 3/7/9 : Keep container tightly closed in a cool, well-ventilated place.
S 16 : Keep away from sources of ignition - No smoking!
S 24/25 : Avoid contact with skin and eye.
S 29 : Do not empty into drains.
S 46 : If swallowed, seek medical advice immediately and show this container or label.
S 51 : Use only in well-ventilated areas.
The manufacturer company is not responsible for any defects or results if the instructions for use and storage of products are not followed !