Application : Surfaces for application must be firm, dry and clean. The surface must be completely clean of the swollen layers of old paint. Deformed surfaces must be repaired with primer or final coating. Putty surface after sanding must be primed with silicone primer Sobsilex Prim.
1. Stage :
After surface preparation without dilution, the concentration is applied on the surface from the outside to the inside. To prevent cracking and sticking out at subsequent stages, you should wait out 24 hours of drying. When cold and wet weather condition, this gap should be slightly extended.
2. Stage :
Surfaces for application to frame a paper tape. Pigmented concentration is applied with a No. 1 steel trowel. Without complete drying of the surface, a second layer is applied with a No. 2 steel trowel. Surfaces on both sides from the outside to the inside are given a sleek look. Not drying the surface remove from the edge of the paper tape. At this stage, between layers you need to wait 6-8 hours.
3. Stage:
After the surface dried, the last layer is applied with a No. 2 trowel. After that, no drying up concentration you need to start polishing with a spatula No. 2. It should be gently without overpressure applied on the surface. If there is excessive pressure on the surface, a scratch will appear. After completing the polishing process, wait 24 hours for drying.